FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » Tips and How-To's
  •  » Cobra irs into a 1967 mustang

    • 1 of 1

       

    5/27/2014 7:24 AM  #1

    rdean9215
    Active Member

    Offline

    Registered: 5/27/2014
    Posts: 4

    Cobra irs into a 1967 mustang

    Hi everyone. I'm looking for tips/advice from people who have completed this swap. I'm picking up a 2003 irs today and am staring to plan this out. I like the idea of the prefab bracket kit out there but not willing to pay an additional $3000 for just brackets and coil overs. Any help/advice would be much appreciated. I have read some where to raise the irs cradle up into the frame people have cut off the stock rubber mounts and welded directly to brackets that bolt to the frame rails.

    Little back ground on my mustang. Mustang 2 ifs and just added 2011 gt brakes to the front. Motor is a 347 with Kaase p38 heads. Looking to set car up for road racing with some weekend driving.

     

    5/30/2014 7:41 AM  #2

    TimC
    I FYI 24-7

    Offline

    From: Wheaton, Illinois
    Registered: 4/01/2013
    Posts: 863

    Re: Cobra irs into a 1967 mustang

    Your question may draw more responses in the Mustang tech section of the forum, as this section is where people post the things they have already done, and are helping others do it, too.

    Have you seen Daze's irs forum?  Daze is a frequent poster here on FYIFord, but also has his own forum for irs.  Here's a link: http://irsforum.boardhost.com/viewtopic.php?id=179
     

    Last edited by TimC (5/30/2014 7:42 AM)

     

    5/30/2014 10:06 AM  #3

    rdean9215
    Active Member

    Offline

    Registered: 5/27/2014
    Posts: 4

    Re: Cobra irs into a 1967 mustang

    Ok thanks I'll move it over there

       •Thread Starter
     

    8/21/2014 8:00 AM  #4

    bulletbirdman
    I FYI 24-7

    Offline

    From: Saucier, Mississippi
    Registered: 5/23/2013
    Posts: 480

    Re: Cobra irs into a 1967 mustang

    http://www.pro-touring.com/showthread.php?64890-67-Fastback-Project-Dalamar/page4&highlight=dalamar

    heres a cobra IRS into a 67

    I made enough money to buy Miami, but pissed it away so fast
     

    4/09/2015 4:39 AM  #5

    selina
    Unregistered

    Re: Cobra irs into a 1967 mustang

    Good info and very nicely done, thanks for posting.

     

     

    1 of 1

  • Index
  •  » Tips and How-To's
  •  »  Cobra irs into a 1967 mustang

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.