| ||
Visit MustangSteve's web site to view some of my work and find details for: FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events |
Offline
Just started reading this and it is gooood(if you like tech junk about camshafts.)
Like the author sez just read the first two and u'll know more than your buddies.
I just got started and thought I'd pass it along.
6sal6
Online!
Thanks Mike...some very good info in there. I'll have to study it when I get done with everything else...If.
BB
Offline
red351 wrote:
I see they mentioned the mysterious 3/4 race cam for those of us that remember looking thur the J C Witney catalog. Ahhh the good old days when we had a lot of ideas with no money to back them.
I hear ya Red. Back in the day racing at Pittsburgh International or street racing at Rt.51 & 31 we knew nothing about cam tech. To make it faster you just went to the junkyard and got a big Lincoln or Caddy motor and hoped for the best. Jack the front up and add some really stiff springs to the rear. Good times.
Offline
Bullet Bob wrote:
Thanks Mike...some very good info in there. I'll have to study it when I get done with everything else...If.
BB
There is mention of Ed Winfield in that first segment!
You know him!
6sal6
REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on. |