FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » length fully extended ??

    • 1 of 1

       

    5/20/2018 3:44 PM  #1

    Don
    Senior 24-7 FYI Addict

    Offline

    From: Coppell, Texas
    Registered: 4/02/2013
    Posts: 1,199

    length fully extended ??

    Whats the extended length of the exposed shaft on a stock 66 Power Steering Slave Cylinder    
     I can't find a spec anywhere.  My cars shaft has only enough room to mount one end rubber isolate, should be two on frame drop down connector.   I'm thinking I might have a defective cylinder RAM.   

    Last edited by Don (5/20/2018 3:44 PM)

     

    5/20/2018 5:56 PM  #2

    almcgee
    I FYI 24-7

    Offline

    From: Fairview, Texas
    Registered: 6/01/2013
    Posts: 781

    Re: length fully extended ??

    Install a Borgeson and get rid of the ram and all the other stuff hanging under the car.  Your car will be a lot happier and your garage floor will be happier with no leaks.

    Mustang Steve Bash in Gruene, Texas September29-30, 2023
     

    5/20/2018 6:33 PM  #3

    Don
    Senior 24-7 FYI Addict

    Offline

    From: Coppell, Texas
    Registered: 4/02/2013
    Posts: 1,199

    Re: length fully extended ??

    almcgee wrote:

    Install a Borgeson and get rid of the ram and all the other stuff hanging under the car.  Your car will be a lot happier and your garage floor will be happier with no leaks.

    I was next in line for a Borgeson install.  The guy before me scared the mech and he moved to canyon lake Tx.  
     

       •Thread Starter
     

    5/20/2018 8:51 PM  #4

    josh-kebob
    Senior 24-7 FYI Addict

    Offline

    From: Madison, AL
    Registered: 4/06/2013
    Posts: 2,902

    Re: length fully extended ??

    almcgee wrote:

    Install a Borgeson and get rid of the ram and all the other stuff hanging under the car.  Your car will be a lot happier and your garage floor will be happier with no leaks.

    that didn't answer his queston....
     

     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  length fully extended ??

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.