FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

11/06/2018 7:37 PM  #1


Autolite 4100 Carburetor 1.12-1.08 bore adapters

This kit is two copper sleeves to size down the bore of a 1.12 Autolite 4100 carburetor for improved throttle response. Each set is hand made and test fit in a 4100 carburetor, they are a tight fit but can be pressed in by hand.  However do to tolerance in manufacturing in the 60s some slight fitting may be required.  I had one customer (the first quote below) that the adapter was loose in one of his two bores (issue with the manufacturing of his carburetor) but the sleeves still functioned flawlessly.THIS KIT WILL NOT TURN A 1.12 CARBURETOR INTO A 1.08 CARBURETOR
If you want a 1.12 carburetor to function exactly like a 1.08 carburetor you would need to install these sleeves, change the jets to meet your engine specs AND change/modify the boosters.

What these sleeves WILL do without any other modification is improve throttle response and make it easier to install a big block 4100 on to a small block

Quotes from customers who are running these sleeves:"Instant difference in throttle response and almost completely eliminated the hesitation off of idle, very impressed.” "The Venturi reducers have been installed and I am very pleased in how the car is running."$29.99  +  $4.50 S&H

Link to my web site where they are for sale
 
https://www.dazecars.com/dazed/UYI8gU.jpg


https://www.dazecars.com/dazed/OgOVCD.jpg

 

Board footera


REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.