FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

11/26/2018 1:37 PM  #1


Bash 2019 date is JUNE 22, 2019 in Clinton, MI

See BobC’s post below

Last edited by MS (1/25/2019 11:04 AM)


Money you enjoy wasting is NOT wasted money... unless your wife finds out.
 

11/27/2018 3:28 PM  #2


Re: Bash 2019 date is JUNE 22, 2019 in Clinton, MI

                                                          2019 MS Birthday Bash

                                                                 Sweet XVI

Cindy and I are proud to host the Bash XVI in Clinton, Michigan on June 22, 2019.
The host hotel is the Carlton Lodge 1629 W. Maumee St.  Adrian, MI.  49221   Phone: 517 263 7000.
The hotel has two floors but no elevator so if you need a room on the first floor, you need to include that information when you make your reservation. Room rates start at $89 per night. There is plenty of parking. Breakfast is included with your room.
For those on a tight budget, there is a Super 8 : 1091 US-223 Adrian, MI 49221,  Phone: 517 265 8888. There is also a Holiday Inn Express: 1077 US 223 49221,  Phone: 517 265 5700.
RV Park: Indian Creek Camp and Conference Center. 9415 Tangent Rd. Tecumseh, MI. 49286.   Phone.  517 423 5659
The location of the Bash is Tate Park, 475 Michigan Ave, Clinton, MI 49236.
The date of the Bash is June 22, 2019. For those that were wanting the Bash to coincide with the Woodward Dream Cruise in August, every hotel in the area has been booked since 2018 and this makes it impossible for us to make this happen. Also there have been several requests to try to schedule the Bash earlier in the summer.
Please try and make your reservations early.
Looking forward to seeing everyone.
Bob & Cindy  AKA Bob C


Retirement has officially started!      BobC    1966 Mustang Coupe (His)     2016 Mustang  (Hers)
 

11/27/2018 4:32 PM  #3


Re: Bash 2019 date is JUNE 22, 2019 in Clinton, MI

Most excellent! Do we need to mention The Bash for the room rate?


Bob    69 Mach 351w, AOD Build-:http://1969stang.com/forum/index.php?/topic/44555-the--oh no I used a word I shouldn't have--is-back/
 

11/27/2018 5:15 PM  #4


Re: Bash 2019 date is JUNE 22, 2019 in Clinton, MI

Made our reservations.  Jean and I are planning to stay through Monday the 24th so we can spend Sunday and Monday at the Henry Ford Museum and will depart on Tuesday.  We are hoping that some of you others will be able to stay over also and join us. 
All the best, see you all in about seven months,

BB

Last edited by Bullet Bob (11/27/2018 5:25 PM)


I have found the true secret of life....keep waking up!
 

11/27/2018 5:43 PM  #5


Re: Bash 2019 date is JUNE 22, 2019 in Clinton, MI

Thank you Cindy & Bob,

Really looking forward to this one 😉

http://www.cladrian.com

Last edited by Jwarley (11/27/2018 5:44 PM)


Life is too short to drive a boring car😎
 

11/27/2018 6:21 PM  #6


Re: Bash 2019 date is JUNE 22, 2019 in Clinton, MI

Bullet Bob wrote:

Made our reservations.  Jean and I are planning to stay through Monday the 24th so we can spend Sunday and Monday at the Henry Ford Museum and will depart on Tuesday.  We are hoping that some of you others will be able to stay over also and join us. 
All the best, see you all in about seven months,

BB

Just got off the phone and we have reservations also. Bullet's idea of the museum sparked my fancy so well stay a couple days also.
 


Gary Zilik - Pine Junction, Colorado - 67 Coupe, 289-4V, T5
 

11/27/2018 6:32 PM  #7


Re: Bash 2019 date is JUNE 22, 2019 in Clinton, MI

rpm wrote:

Most excellent! Do we need to mention The Bash for the room rate?

Yes, please mention the Mustang Steve Bash because this is a special room rate


Retirement has officially started!      BobC    1966 Mustang Coupe (His)     2016 Mustang  (Hers)
 

11/27/2018 8:25 PM  #8


Re: Bash 2019 date is JUNE 22, 2019 in Clinton, MI

Great!!
I may be able to make it work on that date.
BobC, would DTW be the best airport to arrive at from LAX?


"Those telephone poles were like a picket fence"
 

11/28/2018 6:51 AM  #9


Re: Bash 2019 date is JUNE 22, 2019 in Clinton, MI

50vert wrote:

Great!!
I may be able to make it work on that date.
BobC, would DTW be the best airport to arrive at from LAX?

Good news, we are so glad you will be able to make it.  Yes, DTW is the airport you need to use.


Retirement has officially started!      BobC    1966 Mustang Coupe (His)     2016 Mustang  (Hers)
 

11/28/2018 11:09 AM  #10


Re: Bash 2019 date is JUNE 22, 2019 in Clinton, MI

Booked June 20-25  Ford museums here we come (old emberglo girl, me and also my mustang).  talked to Kim at hotel, she was very helpful   NOW get my
but (t) in gear. Complete new ac system, motor mounts and find that sneaky circuit that loads down dash and turn signals.   

Last edited by Don (11/28/2018 11:13 AM)

 

11/28/2018 11:49 AM  #11


Re: Bash 2019 date is JUNE 22, 2019 in Clinton, MI

Might not work for me, too close after my knee replacement.http://cdn.boardhost.com/emoticons/depressed.png


Good work ain't cheap, Cheap work ain't good!   “My tastes are simple: I am easily satisfied with the best"
 

11/28/2018 5:36 PM  #12


Re: Bash 2019 date is JUNE 22, 2019 in Clinton, MI

Rooms booked for the bash 👍

My bride (CFO) may be flying up/back & my son Craig is planning on it as well.

Thanks again Cindy & Bob 👌


Life is too short to drive a boring car😎
 

11/28/2018 5:51 PM  #13


Re: Bash 2019 date is JUNE 22, 2019 in Clinton, MI

Reservations made!  It may very well be Joe and I, Lisa may have to miss again.

 

11/28/2018 6:05 PM  #14


Re: Bash 2019 date is JUNE 22, 2019 in Clinton, MI

Good chance there will be a bunch of us meeting up in Vandalia.  What's the chance, T, that you'll drive your very nice FB up to Clinton? 
Just throwing that out.

BB


I have found the true secret of life....keep waking up!
 

11/28/2018 7:33 PM  #15


Re: Bash 2019 date is JUNE 22, 2019 in Clinton, MI

Booked!  Only question is... one pony or two....http://cdn.boardhost.com/emoticons/devious.png

 

11/28/2018 8:10 PM  #16


Re: Bash 2019 date is JUNE 22, 2019 in Clinton, MI

Anna and I booked 20 -25 June. 

 

11/28/2018 8:20 PM  #17


Re: Bash 2019 date is JUNE 22, 2019 in Clinton, MI

Ditto, June 20-25.


Bob    69 Mach 351w, AOD Build-:http://1969stang.com/forum/index.php?/topic/44555-the--oh no I used a word I shouldn't have--is-back/
 

11/28/2018 8:54 PM  #18


Re: Bash 2019 date is JUNE 22, 2019 in Clinton, MI

Bullet Bob wrote:

Good chance there will be a bunch of us meeting up in Vandalia.  What's the chance, T, that you'll drive your very nice FB up to Clinton? 
Just throwing that out.

BB

well, I will just say I wont commit to anything at this time!  ask me on June 1st!  http://cdn.boardhost.com/emoticons/grin.png
   

 

11/29/2018 1:24 PM  #19


Re: Bash 2019 date is JUNE 22, 2019 in Clinton, MI

terry wrote:

well, I will just say I wont commit to anything at this time!  ask me on June 1st!  http://cdn.boardhost.com/emoticons/grin.png
   

Apparently the Bash has to be extremely close to Vandalia to be able to drive it. Nut up and drive that thing.
 

 

11/29/2018 6:02 PM  #20


Re: Bash 2019 date is JUNE 22, 2019 in Clinton, MI

Mochaman wrote:

terry wrote:

well, I will just say I wont commit to anything at this time!  ask me on June 1st!  http://cdn.boardhost.com/emoticons/grin.png
   

Apparently the Bash has to be extremely close to Vandalia to be able to drive it. Nut up and drive that thing.
 

It's 410 miles from Vandalia to Clinton.
 


Retirement has officially started!      BobC    1966 Mustang Coupe (His)     2016 Mustang  (Hers)
 

11/29/2018 6:20 PM  #21


Re: Bash 2019 date is JUNE 22, 2019 in Clinton, MI

BobC wrote:

Mochaman wrote:

terry wrote:

well, I will just say I wont commit to anything at this time!  ask me on June 1st!  http://cdn.boardhost.com/emoticons/grin.png
   

Apparently the Bash has to be extremely close to Vandalia to be able to drive it. Nut up and drive that thing.
 

It's 410 miles from Vandalia to Clinton.
 

Yep, bout half a day's drive.


Bob    69 Mach 351w, AOD Build-:http://1969stang.com/forum/index.php?/topic/44555-the--oh no I used a word I shouldn't have--is-back/
 

11/30/2018 6:50 AM  #22


Re: Bash 2019 date is JUNE 22, 2019 in Clinton, MI

rpm wrote:

It's 410 miles from Vandalia to Clinton.

Yep, bout half a day's drive.

Maybe for you youngsters...butt (TS&T), 410 will about consume our daily driving tolerance allotment.

BB
 


I have found the true secret of life....keep waking up!
 

12/01/2018 12:30 PM  #23


Re: Bash 2019 date is JUNE 22, 2019 in Clinton, MI

The room is booked. We are looking forward to a ROAD TRIP!!


John  -- 67 Mustang Coupe 390 5 speed
 

12/05/2018 7:44 PM  #24


Re: Bash 2019 date is JUNE 22, 2019 in Clinton, MI

We are booked! 20 - 25. Come on June!

 

12/05/2018 8:58 PM  #25


Re: Bash 2019 date is JUNE 22, 2019 in Clinton, MI

Made our reservations as well...........


.......common sense is a flower that doesn’t grow in everyone’s garden.......
 

Board footera


REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.