FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » Header Fitment on a 69.

    • 1 of 1

       

    4/16/2013 7:36 PM  #1

    inprimer
    Unregistered

    Header Fitment on a 69.

    Anyone know what model header will fit into a 69 fastback with a new Ford crate motor.  The motor is a 302/5.0 with GT40 heads, power steering and a T-5 trans.  The last set I tried would not clear the shock tower.  Any help would be appreciated.

    Last edited by inprimer (4/16/2013 7:37 PM)

     

    4/17/2013 9:59 AM  #2

    Tubo
    2008 BASH V Host

    Offline

    From: Ft. Walton Beach, Florida
    Registered: 4/01/2013
    Posts: 1,765

    Re: Header Fitment on a 69.

    The 5.0 is no different  from a 289/302 in external dimensions. So buy headers designed to fit your 69 chassis. As you may have already discovered Fox body 5.0 headers don't fit. If your crate engine heads are GT-40P's the easiest choice is a set of HiPo cast manifolds.
    OD transmission may also influence your exhast choice. Long tube headers will usually work with a 5 speed, and Shortie's are easy choices for AOD/4R70W automatics.
     

    If it ain't broke, I haven't modified it Yet
     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  Header Fitment on a 69.

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.