FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

6/07/2013 7:09 PM  #1


Rear quarter interior panel question

Starting to put the interior in the 66 Vert and came across a bag with 4 screws, like the one below, in it that had "rear quarter panel" written on it.



Problem is I can only see one place where the screw goes and that is under the rear window crank



Does anyone know where the other screw goes?


66 Vert.  4.6 DOHC, 4R70 Auto, Heidt's M2 frontend
 

6/07/2013 7:34 PM  #2


Re: Rear quarter interior panel question

trying to do a complete "total recall" but, is there a screw hole at either end of the bottom edge of the panel? look at the "front, bottom" edge....

Last edited by josh-kebob (6/07/2013 7:40 PM)

 

6/07/2013 7:42 PM  #3


Re: Rear quarter interior panel question

josh-kebob wrote:

trying to do a complete "total recall" but, is there a screw hole at either end of the bottom edge of the panel? look at the "front, bottom" edge....

On either side of the package tray are a couple.....maybe a couple only found with seat removed.
 


Get busy Liv'in or get busy Die'n....Host of the 2020 Bash at the Beach/The only Bash that got cancelled  )8
 

6/08/2013 10:12 AM  #4


Re: Rear quarter interior panel question

Thanks guys, I had those panels upholstered and they covered up the holes so wasn't sure where they went.  I didn't find anything on the front lower although it seems like one would go there. I did find one on the back top where the seat would hide it and looks like another on the back middle butt(TS) I didn't have that many screws so guess since it's not seen I can use a small screw and washer.  Thanks again, Mike


66 Vert.  4.6 DOHC, 4R70 Auto, Heidt's M2 frontend
     Thread Starter
 

Board footera


REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.