FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

2/28/2017 9:20 AM  #1


2008 Mustang GT Black Cloth Seats - Pony Pattern

2008 Mustang GT Seats / Black Cloth / Pony Pattern / Air Bags Intact / Normal Wear on Drivers Side with no Rips or Tears. Passenger side and rear in excellent condition. Have been sitting for a couple of years so they are dusty and probably need a shampoo. No Stains / Drivers Side Electric / Seat Harness Included. Located in Garland TX. I have the item listed on craigslist for $400 but for you fine gentlemen $300 takes them all. Thanks


A pessimist sees the difficulty in every opportunity; an optimist sees the opportunity in every difficulty.
 

3/01/2017 7:03 PM  #2


Re: 2008 Mustang GT Black Cloth Seats - Pony Pattern

Any idea if they can be fit in a 65 coupe? I guess I haven't heard.  Thanks, Brent


65 mustang coupe, 351W, C6-  2800 stall, B&M blower, 9inch- trac-loc 3.70 gears
 

3/02/2017 8:22 AM  #3


Re: 2008 Mustang GT Black Cloth Seats - Pony Pattern

I am not sure if they would fit in a 65 coupe or not, maybe someone here can chime in. I know the method for mounting the newer seats is different, not sure if they can be modified to mount up. Thanks Brent!
 


A pessimist sees the difficulty in every opportunity; an optimist sees the opportunity in every difficulty.
     Thread Starter
 

3/03/2017 1:54 PM  #4


Re: 2008 Mustang GT Black Cloth Seats - Pony Pattern

I put a set of 07 Shelby seats (essentially the same seat frame) in my 66 coupe and another set of 06 seats in my 65 Falcon without much of an issue. I used the 66 tracks mounted to the newer seats, offset a little rearward on the seat for more legroom. 

Last edited by tweet66 (3/03/2017 1:59 PM)

 

Board footera


REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.