FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

3/12/2017 10:41 PM  #1


1970 coupe quarters

I have to love that I picked up one of the only Mustangs that has no aftermarket quarters available! Well here is to lots of extra work invloved in removing the convertable body line and making these fit. upload function for pictures is not working now just adds to my frustration for the day.
 

 

3/13/2017 8:47 PM  #2


Re: 1970 coupe quarters

     Thread Starter
 

3/13/2017 8:50 PM  #3


Re: 1970 coupe quarters

This is my inspiration for my build!

Last edited by 70 Coupe (3/13/2017 8:51 PM)

     Thread Starter
 

6/08/2017 1:17 PM  #4


Re: 1970 coupe quarters

It Looks like you did a great job of fitting them on your car! A lot of extra work and I guess we all have been there a few more times than we like to remember! It will look great when it is finished!  How are progressing with it? 

 

6/09/2017 5:46 PM  #5


Re: 1970 coupe quarters

jerry wrote:

It Looks like you did a great job of fitting them on your car! A lot of extra work and I guess we all have been there a few more times than we like to remember! It will look great when it is finished!  How are progressing with it? 

Thanks Jerry but I cannot take credit for the quarters a friend of mine welded them in. Although I have done some other work on the car as you will see if searching the forum. Here it is as of today, front suspension on and waiting for the differential install to put her back on the ground and take it to work to finish off the underside, then onto the body.

 

Last edited by 70 Coupe (6/09/2017 5:48 PM)

     Thread Starter
 

6/12/2017 7:03 AM  #6


Re: 1970 coupe quarters

Looks pretty dang good! What type of abrasive did you use to grind your welds down? The only thing id change would be,  id have to re grind the area so that the scratches would be going with the grain not against it.
I am going to try Lehighabrasives.com next for my grinding sanding and polishing products. I've heard from several people that they really like their products and what's cool is they are a heck of alot cheaper than any other place.

 

6/13/2017 9:39 PM  #7


Re: 1970 coupe quarters

A combination of Norton and 3M products were used for sanding/grinding and EVERCOAT for filler products.

     Thread Starter
 

6/14/2017 7:27 PM  #8


Re: 1970 coupe quarters

Looks good I really like 3m resin fiber discs for sanding. I've been meaning to place an order with Lehighabrasives.com they have a bunch of different sanding products. And from what I've heard their products are top notch and cheap.

Last edited by True74yamaha (6/14/2017 7:28 PM)

 

Board footera


REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.