FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

3/12/2017 6:44 PM  #1


Installing 2013 Roush seats in a 65 coupe

I have a beautiful set of 2013 Roush electric seats to put in my 65 coupe, anything in particular I need to know and what about the wiring for the driver's side, also will the rear seats fit and how big of issue are they to install

Last edited by JeffS (3/14/2017 4:29 PM)

 

12/05/2017 9:43 AM  #2


Re: Installing 2013 Roush seats in a 65 coupe

Jeff,
We have installed 2014 seats and we removed the factory tracks/motors and installed stock 67 tracks.  The lower seat trim panel was cut with a body saw to fir the floor pan.

 

6/25/2018 8:54 PM  #3


Re: Installing 2013 Roush seats in a 65 coupe

Glens 1965 50 wrote:

Jeff,
We have installed 2014 seats and we removed the factory tracks/motors and installed stock 67 tracks.  The lower seat trim panel was cut with a body saw to fir the floor pan.

Do you got some pics of the installation and cut?
 

 

6/26/2018 7:36 AM  #4


Re: Installing 2013 Roush seats in a 65 coupe

We did not take any of the first run.  I will see if I can take an after pic.

 

6/26/2018 6:53 PM  #5


Re: Installing 2013 Roush seats in a 65 coupe

Glens 1965 50 wrote:

We did not take any of the first run.  I will see if I can take an after pic.

Would appreciate any, thanks.
 

 

Board footera


REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.