FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » SUPER info about camshaft tech!!!

    • 1 of 1

       

    1/07/2018 7:34 PM  #1

    6sally6
    Hyper FYIFORD ADDICT

    Offline

    From: Surfside Beach,SC
    Registered: 4/02/2013
    Posts: 6,458

    SUPER info about camshaft tech!!!

    Just started reading this and it is gooood(if you like tech junk about camshafts.)
    Like the author sez just read the first two and u'll know more than your buddies.
    I just got started and thought I'd pass it along.
    6sal6



    http://tildentechnologies.com/index.html

    Get busy Liv'in or get busy Die'n....Host of the 2020 Bash at the Beach/The only Bash that got cancelled  )8
     

    1/08/2018 6:40 AM  #2

    Bullet Bob
    Senior 24-7 FYI Addict

    Offline

    From: Montrose, Colorado
    Registered: 4/01/2013
    Posts: 4,774

    Re: SUPER info about camshaft tech!!!

    Thanks Mike...some very good info in there.  I'll have to study it when I get done with everything else...If.

    BB

    "you get what you pay for, good work isn't cheap, and there are NO free lunches...PERIOD!"
     

    1/08/2018 10:36 AM  #3

    BillyC
    I FYI 24-7

    Offline

    From: Chesapeake, Va.
    Registered: 4/02/2013
    Posts: 965

    Re: SUPER info about camshaft tech!!!

    red351 wrote:

    I see they mentioned the mysterious 3/4 race cam for those of us that remember looking thur the J C Witney catalog. Ahhh the good old days when we had a lot of ideas with no money to back them.

     
    I hear ya Red. Back in the day racing at Pittsburgh International or street racing at Rt.51 & 31 we knew nothing about cam tech. To make it faster you just went to the junkyard and got a big Lincoln or Caddy motor and hoped for the best. Jack the front up and add some really stiff springs to the rear. Good times.

    "anyone that stops learning is old, whether at twenty or eighty"Henry Ford
     

    1/08/2018 6:22 PM  #4

    6sally6
    Hyper FYIFORD ADDICT

    Offline

    From: Surfside Beach,SC
    Registered: 4/02/2013
    Posts: 6,458

    Re: SUPER info about camshaft tech!!!

    Bullet Bob wrote:

    Thanks Mike...some very good info in there.  I'll have to study it when I get done with everything else...If.

    BB

    There is mention of Ed Winfield in that first segment!
    You know him!
    6sal6
     

    Get busy Liv'in or get busy Die'n....Host of the 2020 Bash at the Beach/The only Bash that got cancelled  )8
       •Thread Starter
     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  SUPER info about camshaft tech!!!

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.