| ||
Visit MustangSteve's web site to view some of my work and find details for: FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events |
Offline
Does anyone know if the 1970 Mustang 24" fan shroud, fit a 24" champion radiator ?
Thanks
Offline
If that aftermarket radiator has the flanges vertically on the sides, nearest the engine, it should work.
I rate the Champion radiators right up there with electric fans and yellow spark plug wires. But, to each, their own!
Offline
One of these things is not like the other, one of these things does not belong.
Offline
TKOPerformance wrote:
One of these things is not like the other, one of these things does not belong.
Yessereee Bob! - - - - - nothing wrong with Champion radiators. I have thousands of miles on mine.
, and it is a 24 inch with flanges on both sides.
I tried big buck pusher/puller electric fans with so-so results, ended up with an engine driven O/E flex and custom made shroud. It never over heats in 95 out side temps, idleing / air on.
Last edited by Rudi (9/19/2018 9:17 AM)
Offline
HEY!!! YELLOW SPARK PLUG WIRES??????
Last edited by HudginJ3 (9/19/2018 5:37 PM)
REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on. |