| ||
Visit MustangSteve's web site to view some of my work and find details for: FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events |
Offline
Spent some time today at my local LKQ pull a part and came home with a set of these heads..........for $90...
I'll never do that again.....too much crapola to remove just to get to the heads.....ain't worth busted knuckles and a sore back......so one set on the shop shelf awaiting a future project is good enough for me......
Offline
Good Job! It would have to be a very current need to get me to a PNP in these weather conditions.
If you have one of those battery powered impact drivers, those JY trips tend to go a lot quicker.
Offline
TimC wrote:
Good Job! It would have to be a very current need to get me to a PNP in these weather conditions.
If you have one of those battery powered impact drivers, those JY trips tend to go a lot quicker.
I bought a couple of Dewalt impact drivers and they are nice to used in stead of dragging the air hose around.
Offline
TimC wrote:
Good Job! It would have to be a very current need to get me to a PNP in these weather conditions.
If you have one of those battery powered impact drivers, those JY trips tend to go a lot quicker.
Tim,
Today was a good day to do this......in 48 hours we're supposed to be hit with freezing rain followed by snow....typically when that happens around here the power lines come down.....and my generator is in Michigan....
Offline
I picked a whole P motor for $280 for a friend. $130, for the engine, $50 core,
and $100 for them to pull it
Offline
REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on. |