| ||
Visit MustangSteve's web site to view some of my work and find details for: FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events |
Hello
I have a 1978 mustang 2 with a 2.8 engine and I am having a hard time to find 15 in wheels to fit the 4 bolt hubs.
Thanks
Offline
Brian wrote:
Hello
I have a 1978 mustang 2 with a 2.8 engine and I am having a hard time to find 15 in wheels to fit the 4 bolt hubs.
Thanks
Good luck! Not sure they made them. You might try the after market like Stockton Wheel.
And welcome to the forum. Not a lot of M2 owners here, but we aim to help anyone who asks.
Last edited by lowercasesteve (12/13/2018 1:44 PM)
Offline
Legendary Wheels shows a 4 lug 15x6 wheel in 4 on 4.25".
Offline
If they are 4 on 4.25" (also referenced as 108mm) there should be a lot of selections. That was the Fox Mustang bolt pattern too. Now, the width and offset may be a challenge, as I've no idea what that should be for a MII. I know I have a set of 4 lug Fox wheels in the shop that are either 15" or 16", and I'm guessing in the 7-8" width range. Not sure exactly what they are; they were on the car when I bought it. I've since converted to 5 lug and Cobra R wheels, so they're just sitting there...
REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on. |