FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

1/10/2019 12:54 PM  #1


Bullet Bob's Major Purge....

The following is a list of stock 65/66 stuff that I am offering mostly for FREE and will ship for the cost of shipping unless otherwise noted.   I only hope there is someone out there that can use this stuff for a low dollar resto, DD, or flipper.  Otherwise it will all end up in the scrap yard or dump.  If you have any interest please PM me and I'll calculate the shipping cost.  Then if you are still interested I'll get it out to you.

1.  Mustang "Grab Box" 16X16X16", approx. 44 lbs.  Contains the following and maybe something else...YOU MUST TAKE IT ALL ...THE WHOLE BOX:
         2 - Repop 65/66 Battery trays (one new, one good used)
         2 - Sets of good 8" axle u-bolts
         Set of stock spring plates (shock mount plates)
         One OEM Jack with handle
         Working stock AM radio
          Good used three speed AC blower motor (Hang-on type)
          Good used factory OEM heater blower motor
          New set of 65/early 66 motor mounts
          Good (looks new) 66 alternator voltage regulator
          New 66 fuel filter ( screws into the carb bowl)
           New stock power steering cyl. seal kit
           New Scott Drake Pony Kick Panel Trim
           New choke heater tube kit for 65/66
           Used 66 two-speed wiper motor with switch.  Does not "park".
           Used C4 speedo cable.
                                                                                  SOLD...SOLD...SOLD

Nearly new Scott Drake Remote Left + Matching Right Mirror set, 65/66,  $50.00 + shipping.

Slightly used 67 20" 3-row copper radiator.  Has left discharge.  Slight core support trimming  and later water pump required for use on a 65 or 66.                   SOLD


Complete set of used 65/66 Hard Top window glass.  This was all in our 66 and is usable but has what appears to be hard water spots.  My efforts to remove these spots were unsuccessful.
                                                                  SOLD

Stock 66 AC condenser.  System was working when I remove this so it doesn't leak.
                                                                  FREE + Shipping..........SOLD

66 Power Steering Box and column with good turn signal switch.  This seems to be a good box, could probably benefit from a proper adjustment.               Free + shipping

Set of used but good front springs.                             SOLD

New Scott Drake windshield and backlite gaskets.    Pair: $20.00 + shipping.............SOLD

65 Steering Wheel, modified to 15" diameter.  Need serious plastic repair.
                                                                                           SOLD

Used 66 dash pad.  Dark red.  No cracks, has center studs but is missing the outer studs.
                                                                                              Free + shipping

Grant Steering Wheel.  Wood semi-cheapie with hub adaptor for 1968 Mustang.     SOLD
                                                                                             

Passenger side Grey upholstry and foam for 1992 Mustang seat.  Good cond.
                                                                                               Free + shipping..........SOLD
                                                                                            
I will text pix of any of this if desired.  Contact me via PM for shipping quote, pix, or questions.

BB

          

Last edited by Bullet Bob (7/05/2019 2:01 PM)


"you get what you pay for, good work isn't cheap, and there are NO free lunches...PERIOD!"
 

1/10/2019 5:28 PM  #2


Re: Bullet Bob's Major Purge....

I would be interested in the 67 radiator if shipping is reasonable. 76262 Texas

John

 

1/16/2019 7:59 AM  #3


Re: Bullet Bob's Major Purge....

Addition to BB's major purge:

Good used stock 66 heater.  Has new motor and defrost diverter, needs new heater core.

SOLD

BB
 

Last edited by Bullet Bob (1/19/2019 3:26 PM)


"you get what you pay for, good work isn't cheap, and there are NO free lunches...PERIOD!"
     Thread Starter
 

1/16/2019 8:59 PM  #4


Re: Bullet Bob's Major Purge....

Don’t forget to acknowledge Bullet’s GARAGE POINTS if you benefit from the free stuff.


Money you enjoy wasting is NOT wasted money... unless your wife finds out.
 

1/16/2019 9:01 PM  #5


Re: Bullet Bob's Major Purge....

Bullet, can you post or send a picture of that Grant steering wheel?  What diameter is it?  Looking for one for the 56 F100..


Money you enjoy wasting is NOT wasted money... unless your wife finds out.
 

1/17/2019 5:24 AM  #6


Re: Bullet Bob's Major Purge....

Bob, what's your zip code so we can calculate shipping?

 

1/17/2019 12:12 PM  #7


Re: Bullet Bob's Major Purge....

gjz30075 wrote:

Bob, what's your zip code so we can calculate shipping?

MS:  Steering wheel (Grant) is gone.

giz30075:  81401

BB


"you get what you pay for, good work isn't cheap, and there are NO free lunches...PERIOD!"
     Thread Starter
 

1/17/2019 12:43 PM  #8


Re: Bullet Bob's Major Purge....

interested in the grab box, heater assembly (if it fits the 65) ,and stock springs

I will text you


If it aint broke, I have'nt tried to "Fix" it yet!
 

Board footera


REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.