FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

6/27/2021 10:59 AM  #1


Recommend water pump

I am getting ready to install a 347 crate engine and plan to replace the water pump
What is recommended
Standard volume or High volume?
Cast iron or aluminum?
I have an aluminum 24 radiator with a 7 blade clutch fan AC PS PB


68 Cougar XR7 347 stroker T5 3:80
 

6/27/2021 11:05 AM  #2


Re: Recommend water pump

Standard volume/OEM-type pump should be fine.
To bad we can't do pictures very easily....I would love to see your set-up!!
6sally6


Get busy Liv'in or get busy Die'n....Host of the 2020 Bash at the Beach/The only Bash that got cancelled  )8
 

6/28/2021 5:33 AM  #3


Re: Recommend water pump

What accessory drive are you running?  You need to make sure the timing cover and water pump match the accessory drive style.  Serpentine systems use a reverse rotation pump.  V-belts use a standard rotation pump.  I think there are some length differences on early pumps too.

Brand wise, GMB makes good pumps if one is available for your application. 

 

6/28/2021 7:35 AM  #4


Re: Recommend water pump

I have a FlowKooler high volume aluminum water pump and am happy with the perfromance.
Cooling System Details …


  • Aluminum Radiator: Summit SUM-380461 (Manufactured by “Northern”)
  • [list=circle]
  • Installs in the stock location.
  • Core dimensions: W15.625”x H 17.375”x D 2.25”
  • Inlet & outlet on Passenger Side

  • Flow Kool Water Pump (#1680)
  • Electric Fan: Spal 16” single-speed #30102120
  • No Fan shroud.
  • DCC Fan Controller #FK45
  • 180° Thermostat

  •  Note that I had to slightly trim the nose of the water pump to avoid contact with the electric fan.
    I also have a Vintage Air A/C system.


    65 Fastback, 351W, 5-speed, 4 wheel discs, 9" rear,  R&C Front End.
     

    6/29/2021 5:12 PM  #5


    Re: Recommend water pump

    Flowkooler


    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
     

    7/01/2021 2:32 PM  #6


    Re: Recommend water pump

    Flowkooler
     

    Last edited by almcgee (7/01/2021 2:33 PM)


    Mustang Steve Bash in Gruene, Texas September29-30, 2023
     

    Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.