FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

8/19/2021 8:23 AM  #1


66 Mustang Windshield

Any thoughts on Windshield for 66 Mustang coupe.
Safelite has 2 available for $437. (Window only)
Looked on Kentucky Mustang site Carlite is listed but not available $233
Reproduction Windshield $170  Available
All are Tinted
 Shipping From Kentucky Mustang is $200
Is there any difference between them. Car is not a show car so Carlite is not needed, but would be nice. Can make a day of it and drive to Kentucky mustang to pickup saving some money. Time is not an issue.

 

8/19/2021 8:54 AM  #2


Re: 66 Mustang Windshield

Years ago I got the windshield for my 68 from a local Speedy Auto Glass franchise.  All that was available at that time was a tinted PPG glass but that was ok because the lack of a Carlite logo was not an issue. The price seemed reasonable IIRC, but I supplied the new rubber which I got from NPD.
You should  check with local auto glass shops,  could  save the shipping costs.
While the car was in the glass shop I took the stainless trim home and buffed it up to restore the shine.


Good work ain't cheap, Cheap work ain't good!   Simple Man
 

8/19/2021 9:09 AM  #3


Re: 66 Mustang Windshield

Six years ago when I was putting the Heap back together I popped for a complete replacement set of glass from (I think) Virginia Classic Mustangs.  I bought the less expensive brand X stuff since the car is nowhere close to an "original" restoration.
The back lite and windshield are very good...nearly perfect.  The door windows have a little ripple in them.  Overall I'm very happy. 
One thing I learned when buying from a local shop is to get a couple of friends to hold the windshield up and at an angle close to how it will lay in the car.  Then look through it at vertical lines...board fence works well...to see if it distorts the view, especially at the ends.
I went through three to find a decent one for a Mazda 929 years ago.  The jigs seem to go down hill through the less expensive manufacturers.

BB


"you get what you pay for, good work isn't cheap, and there are NO free lunches...PERIOD!"
 

8/19/2021 9:10 AM  #4


Re: 66 Mustang Windshield

SC will replace free if vision is "impaired" through glass.
Had mine replaced a few years back and WHAT-A-DiFFERENCE in look thru! Tinted helped a lot. No-show car either so who keerz who makes it!
Point being.........There are plenty of replacement windshields out there......don't  over pay because it is a 60+ year old car!
It is  'old-tech' to properly install it with the gooey caulk and stuff. My advice.have it put in.......
6sally6


Get busy Liv'in or get busy Die'n....Host of the 2020 Bash at the Beach/The only Bash that got cancelled  )8
 

8/19/2021 12:07 PM  #5


Re: 66 Mustang Windshield

There are few installers who can successfully install a windshield SO IT DOES NOT LEAK.  Do it yourself and be sure.  It will save you numerous trips back to the shop to get leaks fixed. 

WD-40 is your best friend for cleanup of the black goo.  And masking tape everything around it to make cleanup easier.


Money you enjoy wasting is NOT wasted money... unless your wife finds out.
 

8/19/2021 1:29 PM  #6


Re: 66 Mustang Windshield

I pretty much 'lucked-out' on my install!
Old-skool fella at the glass shop did mine.
He was sorta bent over......looked to be in his 60's....unfiltered Camel smoker....
It's been many-moons-ago in Charleston so he's prolly dead now!
       "Don't worry bubba...I've done more of these old cars than I kear ta talk a boot".
6sal6


Get busy Liv'in or get busy Die'n....Host of the 2020 Bash at the Beach/The only Bash that got cancelled  )8
 

8/22/2021 4:29 PM  #7


Re: 66 Mustang Windshield

does the dash pad need to installed before installing windshield?

     Thread Starter
 

8/22/2021 5:22 PM  #8


Re: 66 Mustang Windshield

Don't matter..............IF you're re-doing the headliner do it with the windshield out(rear too ideally)
6sally6


Get busy Liv'in or get busy Die'n....Host of the 2020 Bash at the Beach/The only Bash that got cancelled  )8
 

8/22/2021 6:35 PM  #9


Re: 66 Mustang Windshield


1966, vert, 347 stroker, T5z, 4 wheel disc, pb, 3.70 LS 9", EPAS
 

8/22/2021 7:52 PM  #10


Re: 66 Mustang Windshield

I have a Windshield. not sure how far you are from me.

Last edited by BILLY WALTON from GEORGIA (8/22/2021 7:57 PM)


Its really me....I fixed my caps lock .
 

8/23/2021 6:01 AM  #11


Re: 66 Mustang Windshield

Do you care if its date coded or not?

Last edited by TKOPerformance (8/23/2021 6:01 AM)

 

8/28/2021 9:05 AM  #12


Re: 66 Mustang Windshield

KeithP wrote:

I used this place years ago and picked it up from the warehouse near me. 

https://windshieldstogo.com/?gclid=CjwKCAjw64eJBhAGEiwABr9o2DcizBvEPJYdtKOkEuALVsYdN6sLS8bsLRimoX6DaMFBnvcx3MLCMhoCVeYQAvD_BwE

Used this website and was able to pick up Windshield in Knoxville Tn. Only an hour drive from me. Windshield of course is Chinese made. DOT approved with Tinted band across top. I Installed it and clarity is good. Glass Just a little bit thinner than my scratched windshield which was a repop Shat-R-Proof. My cost for Windshield only was $125 Part# DW00654 Brand name TriVal

SafeLite quote was $436.99 glass only

Local Auto glass shop was $351 they install. Would not allow me to purchase glass only

Kentucky Mustang $170 for repop. It had part# W654C. Shipping was $200. They also listed a Carlite Part#5104 for $233. None available. Drive time for me to Kentucky Mustang was 4 hrs one way. I do not know, but think it is same glass  as I installed.
I have windshield in. Only need to squeeze in the black goo

Thanks for help

     Thread Starter
 

Board footera


REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.