FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » just about to install my new Felpro Intake gaskets 90103

    • 1 of 1

       

    7/27/2013 8:25 PM  #1

    Fastbackbhoy
    FYI Addict

    Offline

    From: St. Catharines Ontario Canada
    Registered: 4/01/2013
    Posts: 156

    just about to install my new Felpro Intake gaskets 90103

    LOOKS LIKE THERES A GAP ON INTAKE PORTS NO MATTER WHICH WAY YOU INSTALL ON HEADS When they are locked into the head gasket tabs on the bottom

    the gap is at top about 45 thou  noticed one i took off is exactly the same???
    anyone got any pics

    jimmy O
     

     

    7/27/2013 9:28 PM  #2

    MS
    Forum Originator

    Offline

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 12,661

    Re: just about to install my new Felpro Intake gaskets 90103

    What do you mean GAP?  Where?  Post a pic...

    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
     

    7/27/2013 11:37 PM  #3

    Fastbackbhoy
    FYI Addict

    Offline

    From: St. Catharines Ontario Canada
    Registered: 4/01/2013
    Posts: 156

    Re: just about to install my new Felpro Intake gaskets 90103

    Its al good the tabs on the head gasket on one bank were pressed down when i alighned them uop as should be the gap is Gone and fits correct as should be

    Jimmy O

       •Thread Starter
     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  just about to install my new Felpro Intake gaskets 90103

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.