Right, wrong or indifferent the 71’ has mud flaps as of today.

Skip to: New Posts  Last Post
Posted by Bentworker
9/17/2023 3:49 PM
#1

I didn’t drill any holes, made stainless brackets that mounted to existing fasteners.  Was a bit of a pain!

I know it isn’t for everyone but I plan on driving it to a local show next weekend and wanted some sort of chip prevention.  The urethane Rallyarmor material was interesting to cut.

 
Posted by Rudi
9/19/2023 8:40 AM
#2

When I used to go to long trip MCA events I bought inexpensive flexible plastic mud flaps and contoured them to each wheel well.
I used small binder clips to fasten them to the lip on each wheel well, about 5-6 per side. Easy on easy off and never lost one in all those trips.
To keep bugs from rad and front end of the car I got a piece of fibre glass screening that covered the entire grill opening and using the same binder clips fastened it to the rad support at the top and the lip on the lower valance.
Both these tricks sure saved a lot of clean up at the destination.


Good work ain't cheap, Cheap work ain't good!   Simple Man
 
Posted by MS
9/19/2023 1:57 PM
#3

I consider ever bug splatter and every rock chip on my Mustang a trophy that says I drive it without worry.


Money you enjoy wasting is NOT wasted money... unless your wife finds out.
 
Posted by Cab4word67
4/21/2024 11:45 AM
#4

MS wrote:

I consider ever bug splatter and every rock chip on my Mustang a trophy that says I drive it without worry.

Well said!
 


Slammed Big Blue, ran over the varmints that messed with the Stang. Now all is good in the NW
 


 
Main page
Login
Desktop format