I had my first when I was 16 ( 1972 ) it was a 64 1/2 # 300 something yellow it was a 289 auto I worked on it in high school .. my 2nd was green a 65 260 auto not sure if the block was original .. when my son was16 my father -in- law bought him this " 66 " https://ibb.co/RvXJ43T He was done with it by the time he was graduating high school ... Didn't like that you have to work on them..
After upgrading the engine using the original 289 block - Gt-40 heads - roller cam, lifters, and roller rocker arm assembly -edlebach torquer manifold - holley 650 - hooker headers - ram air ( 69" fiberglass reproduction)
I added a T5 with " MS " cable clutch transmission and Petals with the bearings assembly
Then I installed " BB " 4 way disc Curved and slotted Brake assembly - adding " MS " power brakes and master system ( after all finished and operating it for a while decided to go with hydro boost upgrade instead because of the cam vacuum being only 8" )
After driving in this Texas heat didn't like how high the temperature would rise to so I then upgraded a 24" cross flow radiator in the process I added a 130 amp alternator and turned my battery 90゚
I'm just now finishing up the final touches on a hydro boost unit, I also added power steering cooler and drilled lower part of the front valance for more air flow It seems to be working good
Still on my list to finish up is to put a custom spoiler to my liking and install the rear leaf Springs and the 3.25 gear set
HERE'S the post of how I now go through to post pictures..
Vkt-66 wrote:
I think I figured it out ... I now at this screen have to click the " imgbb " tab
Drag and drop or paste images here to upload You can also browse from your computer or add image URLs.
then
Upload and share your images. START UPLOADING hit start uploading
go though the prosses pick your picture and at the embed codes screen select BBCode full linked then hit copy on the box below then go back to your message screen and right click your mouse .. select paste .. you get the code and then the picture