rear spring noise

Skip to: New Posts  Last Post
Posted by Alan
9/09/2024 5:59 PM
#1

The passenger side rear spring on my 67 groans and squeaks something terrible. 95% sure it is in the front mount. Pulled the bolt out and it looks good, but is dry. What is the best way to get it to shut up? Grease, anti seize, or something else.
(would be a bash thrash, but i will not be able to attend this year) Dang work getting in the way.

 

Last edited by Alan (9/09/2024 6:01 PM)


67 Coupe, 5.0 EEC IV Fuel injected. T5, 3:70 rear
 
Posted by MS
9/09/2024 6:09 PM
#2

Is it a replacement spring?  Most have poly type front eye bushings and the squeak a lot. No cure that I am aware of. 
I hear mine squeak every time my butt rises out of the seat to exit the car.


Money you enjoy wasting is NOT wasted money... unless your wife finds out.
 
Posted by Alan
9/09/2024 7:44 PM
#3

They are replacements. Moved the spring a little bit on the hoist and it is definetely the mount. 

 


67 Coupe, 5.0 EEC IV Fuel injected. T5, 3:70 rear
 
Posted by lowercasesteve
9/09/2024 8:50 PM
#4

Replace the spring bushings.  It's not difficult, and a machine shop can do it in a trice.  It should take your new bushings with no trouble.


Original owner - 351w,T-5, 4whl disks, power R&P
 
Posted by MS
9/09/2024 8:51 PM
#5

Be sure the bolt was tightened only after the weight of the car was on the springs. That will remove any extra torque that could possibly be being applied to the bushing.


Money you enjoy wasting is NOT wasted money... unless your wife finds out.
 
Posted by TKOPerformance
9/10/2024 5:37 AM
#6

If they are poly bushings make sure you use the right grease on installation.  This is the right stuff:

https://www.prothanesuspensionparts.com/191750

We call it snake snot.
 

 


 
Main page
Login
Desktop format