Wanted 65 or 66 stock 5 lug rear end

Skip to: New Posts  Last Post
Posted by kyreb67
12/19/2024 9:32 PM
#1

I'm doing a 4 to 5 lug swap on my wife's car and i'm looking for a rear end for sale
I'm in western KY 
Thanks !

Last edited by kyreb67 (12/19/2024 9:34 PM)

 
Posted by Radon30
12/20/2024 5:57 PM
#2

I do have a 65 axle 3.00 gearing, i did pull it apart, had some interesting in the 3rd member but they found one local. Are you looking for one complete with brake hardware or just the housing, 3rd member and axles?
Unfortunately im located in Southern Tx, so not so close.

Rich
 

 
Posted by kyreb67
12/20/2024 8:47 PM
#3

thanks for the reply , I'm looking for 1 as complete as I can find 
Thanks again

 
Posted by retired65
12/24/2024 1:38 PM
#4

I HAVE A COMPLETE REAR AXLE ASSEMBLY I TOOK OUT OF MY 65 FASTBACK.  IT HAS BRAKE ASSEMBLES AND CABLES FOR EMER. BRAKE. THE AXLE CODE ON THE DOOR SHOWS "F". WHICH SHOWS IT TO BE A 2.80:1 AND LIMITED SLIP.  I WAS NEVER INSIDE IT.  I DROVE IT FOR A WHILE BEFORE CHANGED EVERTHING TO A 9 INCH LINCOLN VERSAILLE ASSY.  IT DIDN'T HAVE ANY PROBLEMS BEFORE I CHANGED IT OUT.  IT DOES NEED A NEW PINION SEAL.  IT DOESN'T LEAK ALL THAT BAD, BUT IT DOES DRIP AFTER SITTING A WHILE.  I AM LOCATED SOUTH OF SPRINGFIELD, MO. $300   PICK-UP ONLY . THANKS

Last edited by retired65 (6/17/2025 1:17 PM)

 
Posted by HudginJ3
12/27/2024 9:12 PM
#5

I see you’re looking for a 65, 66. I have a 70 five stud for a 250 six cylinder with no brakes. I don’t know what the difference is but you can have it if you want to come to Dallas and pick it up. I’m pretty sure it is slap worn out cause it’s making noise like pinion gears. It has 150,000 miles on it.


70, ragtop 351W/416 stroker Edel Performer heads w pro flow 4, Comp roller 35-421-8. T5
 
Posted by MS
1/05/2025 11:09 AM
#6

The 70 rear axle is 2” wider than the 65-66


Money you enjoy wasting is NOT wasted money... unless your wife finds out.
 
Posted by retired65
1/06/2025 4:28 PM
#7

retired65 wrote:

I HAVE A COMPLETE REAR AXLE ASSEMBLY I TOOK OUT OF MY 65 FASTBACK.  IT HAS BRAKE ASSEMBLES AND CABLES FOR EMER. BRAKE. THE AXLE CODE ON THE DOOR SHOWS "F". WHICH SHOWS IT TO BE A 2.80:1 AND LIMITED SLIP.  I CAN'T SPEAK TO THAT'S WHAT IT IS AS I WAS NEVER INSIDE IT.  I DROVE IT FOR A WHILE BEFORE CHANGED EVERTHING TO A 9 INCH LINCOLN VERSAILLE ASSY.  IT DIDN'T HAVE ANY PROBLEMS BEFORE I CHANGED IT OUT.  IT DOES NEED A NEW PINION SEAL.  IT DOESN'T LEAK ALL THAT BAD, BUT IT DOES DRIP AFTER SITTING A WHILE.  I AM LOCATED SOUTH OF SPRINGFIELD, MO.  I WOULD SELL IT FOR $300 IF YOU"RE INTERESTED.  THANKS

price changed on axle assy.
 

 


 
Main page
Login
Desktop format