FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » Swap Meet
  •  » Compressor bracket and idler pulley for sanden 65-69 289/302 or 351W

    • 1 of 1

       

    10/08/2013 3:56 PM  #1

    MS
    Forum Originator

    Offline

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 11,744

    Compressor bracket and idler pulley for sanden 65-69 289/302 or 351W

    This sanden compressor bracket was originally designed for a 289 with lower water pump hose on passenger side.  It has been modified with a 66 style 289 power steering pump bracket, and has had the bolt holes redrilled so it will mount to a 351W with 69 water pump.  So, if you have a 351W with a water pump having the lower hose on the passenger side, and a original power steering pump, this is the piece you need to put it all together.

    It could be cut back apart to harvest the 66 V8 power steering bracket OR the sanden mount with idler, or it could be redrilled to fit the 289/302 heads.

     $90 plus shipping.  Or make me an offer I cannot refuse.

    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
     

    4/16/2014 2:36 PM  #2

    almcgee
    I FYI 24-7

    Offline

    From: Fairview, Texas
    Registered: 6/01/2013
    Posts: 782

    Re: Compressor bracket and idler pulley for sanden 65-69 289/302 or 351W

    I will see you on Friday and we can come to a mutually agreed upon price. I have some credit from the horns.

    Mustang Steve Bash in Gruene, Texas September29-30, 2023
     

    4/16/2014 2:48 PM  #3

    MS
    Forum Originator

    Offline

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 11,744

    Re: Compressor bracket and idler pulley for sanden 65-69 289/302 or 351W

    What side is your lower hose on?

    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
       •Thread Starter
     

     

    1 of 1

  • Index
  •  » Swap Meet
  •  »  Compressor bracket and idler pulley for sanden 65-69 289/302 or 351W

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.