| ||
Visit MustangSteve's web site to view some of my work and find details for: FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events |
Offline
This info is for all the guy/gals that want to put the biggest wheel and tire under their Mustang , I used the Eastwood fender roller that is stated that it will not roll double lips, well it will with a little patience and persistence just take your time and do not be too aggressive. I have rolled the rear quarters on the 70 and I have a 275/40/17 under the rear of the beast.
Offline
Be sure to knock down / smooth out any metal fender lip protrusions at the tire's 10 oclock and 2 oclock. I run 285/40-17 rears, and the 10 & 2 gave me more rub than the 12 oclock.
Nice car!
Paul
Offline
While that is nice and clean and pretty, you may want to do something to keep dirt and moisture from accumulating in that groove. Maybe fill it with some high dollar flowable seam sealer? But paint it well first.
Offline
Prof wrote:
Be sure to knock down / smooth out any metal fender lip protrusions at the tire's 10 oclock and 2 oclock. I run 285/40-17 rears, and the 10 & 2 gave me more rub than the 12 oclock.
Nice car!
Paul
Thanks for the info Paul... I will be sure to check those areas out.
Offline
MS wrote:
While that is nice and clean and pretty, you may want to do something to keep dirt and moisture from accumulating in that groove. Maybe fill it with some high dollar flowable seam sealer? But paint it well first.
Thanks MS I was planning on filling the area with some type of sealer. Possibly like a flowable seam sealer used on drip rails.
REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on. |