FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » I posed my DIY alignment in the tips section.

    • 1 of 1

       

    3/21/2018 10:14 PM  #1

    jkordzi
    I FYI 24-7

    Offline

    From: Dallas, TX
    Registered: 12/28/2013
    Posts: 923

    I posed my DIY alignment in the tips section.

    I posted a how to about how I did a home alignment using a simple jig I made.  Pls let me know if you see a problem and I'll fix it. 

    Cheap, Fast, Good:  Pick Any Two
     

    3/24/2018 10:31 PM  #2

    Bentworker
    I FYI 24-7

    Offline

    Registered: 9/17/2017
    Posts: 437

    Re: I posed my DIY alignment in the tips section.

    Was a good read, thanks for posting it.

     

    3/25/2018 8:19 PM  #3

    Bullet Bob
    Senior 24-7 FYI Addict

    Offline

    From: Montrose, Colorado
    Registered: 4/01/2013
    Posts: 4,774

    Re: I posed my DIY alignment in the tips section.

    I was very glad to see exactly how you went about setting up a "level playing field"...so to speak.  I really like your fixture for getting exactly + or - 20 degrees for the caster calc.  Nice job, good info.  I did my own alignment a few years ago but this will help make the one I start tomorrow even more accurate.  After suffering loose UCA's on the bash trip to FWB last year, following a pro alignment job, there'll be no more "professional alignment" jobs on our  66 .

    Thanks,

    BB
     

    "you get what you pay for, good work isn't cheap, and there are NO free lunches...PERIOD!"
     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  I posed my DIY alignment in the tips section.

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.