| ||
Visit MustangSteve's web site to view some of my work and find details for: FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events |
1 of 1
Offline
Sides do not follow the shape of the car. Vertical rear body line where it should match the vertical lines in the quarter panel end caps are 1/2” off. Had to do alot of shimming to get the vertical ends to match the vertical indentation of the end caps.
Quality rating: 2 out of ten.
Offline
Thanks for the feedback on the bumper.
I've been thinking bout repros for the 67. Red351 has generously given me an original .... just gotta find an envelope, or a suitcase, big enough.
Didja reach out to Rick as Bob suggested? Good guy.
Last edited by 50vert (10/28/2019 7:30 PM)
Offline
Keep working on repairing the one that got bent.
Online!
MS wrote:
Sides do not follow the shape of the car. Vertical rear body line where it should match the vertical lines in the quarter panel end caps are 1/2” off. Had to do alot of shimming to get the vertical ends to match the vertical indentation of the end caps.
Quality rating: 2 out of ten.
I fitted Nordan front and rear about 16 years ago. They are ok, but surface rust appeared on the top of the rear one (in between the body and the top of the bar - so not too noticeable). Other than that, they are ok.
Sad to hear about your experience and I'm really disappointed with NPD. They usually sell better product than this.
Offline
I bought my rear bumper 10 years ago from Virginia Classic. It looks perfect on the car so I know it's not perfect because my cars not perfect. I guess it's perfectly imperfect for MY application.😜
1 of 1
REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on. |