FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » Swap Meet
  •  » GT40P Heads - professionally prepared

    • 1 of 1

       

    1/30/2020 4:54 PM  #1

    GPatrick
    Senior 24-7 FYI Addict

    Offline

    Registered: 4/01/2013
    Posts: 1,106

    GT40P Heads - professionally prepared

    A change in project scope and these GT40P heads are now for sale.  Professionally prepared including a high performance multi-angle valve job, new springs and retainers, etc.  Crane Beehive springs are good for up to .550 to .600 lift and hydraulic lifter cams up to 240's duration but will work well with a stock GT cam.   Heads were stripped, shot peened, magnafluxed, fitted with bronze guides. milled, and blueprint assembled.  Ready to bolt on.  $975 for the pair plus shipping from Colorado

    Also have:
    Crane Energizer Roller rockers 11746  - 3/8 1.6  $200 (see https://www.summitracing.com/oh/parts/crn-11746-16)
    Crane 36656-16 Pedestal to guide plate conversion $115 (see https://www.summitracing.com/oh/parts/crn-36656-16)
    Crane HR cam: 444221  216/220 @.050" .533"/.544"  112*  $275 (see https://www.summitracing.com/parts/crn-444221/overview/) - SOLD!
    Canton Front Sump T-Pan #15-610  289/302/5.0 6QT  $250 (new - see https://www.summitracing.com/oh/parts/ctr-15-610)
    Canton pick-up tube #15-611   $40 (see https://www.summitracing.com/oh/parts/ctr-15-610)

    All prices are plus shipping.
     

    Last edited by GPatrick (3/18/2020 10:01 PM)

     

    3/16/2020 6:39 PM  #2

    nascardave
    FYI FORD Member

    Offline

    Registered: 6/10/2013
    Posts: 16

    Re: GT40P Heads - professionally prepared

    Hi,  If you still have the camshaft my friend is interested. Dave

     

    3/31/2020 8:17 AM  #3

    GPatrick
    Senior 24-7 FYI Addict

    Offline

    Registered: 4/01/2013
    Posts: 1,106

    Re: GT40P Heads - professionally prepared

    All sold!

       •Thread Starter
     

     

    1 of 1

  • Index
  •  » Swap Meet
  •  »  GT40P Heads - professionally prepared

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.