FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » Opinions or suggestions on Duraspark upgrade.

    • 1 of 1

       

    7/28/2013 5:31 PM  #1

    T. McG/393
    FYI Addict

    Offline

    From: Central IL.
    Registered: 4/01/2013
    Posts: 126

    Opinions or suggestions on Duraspark upgrade.

    Here is what I have:  '66 fb with 393 stroker. Blue strain relief module, distributor with large cap, Accel coil, no inline resistors.

    Here is what I have ordered from Napa:   TFI coil p/n IC24, coil connector p/n ICC1, correct coil wire from TFI coil to dist.

    What spark plugs should I use? Anything else I need. Anyone have a tutorial on this?

    Hosted Mustang Steve Birthday Bash 2009        http://www.tm66mustang.com
     

    7/28/2013 6:52 PM  #2

    6sally6
    Hyper FYIFORD ADDICT

    Offline

    From: Surfside Beach,SC
    Registered: 4/02/2013
    Posts: 6,932

    Re: Opinions or suggestions on Duraspark upgrade.

    T,
    Have you done the light weight advance springs that I'm always suggesting to guyz?
    Limit the advance to 36* total all in by 2000/2500RPM?
    Killer!!!
    6sal6

    Get busy Liv'in or get busy Die'n....Host of the 2020 Bash at the Beach/The only Bash that got cancelled  )8
     

    7/28/2013 7:13 PM  #3

    T. McG/393
    FYI Addict

    Offline

    From: Central IL.
    Registered: 4/01/2013
    Posts: 126

    Re: Opinions or suggestions on Duraspark upgrade.

    I had the dist recurved before I put it in but not sure about the advance, will check that out sometime. Thanks.

    Hosted Mustang Steve Birthday Bash 2009        http://www.tm66mustang.com
       •Thread Starter
     

    7/29/2013 8:33 AM  #4

    ultrastang
    I FYI 24-7

    Offline

    From: Camden, Arkansas
    Registered: 4/01/2013
    Posts: 570

    Re: Opinions or suggestions on Duraspark upgrade.

    Some helpful wiring diagrams;

    http://www.fordification.com/forum/viewtopic.php?f=8&t=48178

     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  Opinions or suggestions on Duraspark upgrade.

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.