FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

6/28/2020 7:31 AM  #1


Strange Differential Vent

I have a Strange housing in my car.  One of the things on my "to do" list was to install a hose on the vent tube because it looked as if Strange just capped the vent tube. I was looking at vent tubes and breathers last night and followed a link to Strange's website and found this vent, which is what is installed on my rear housing.


https://www.strangeengineering.net/product/housing-vent.html/


Looking at it and reading the description, it looks like that is the complete unit and that they don't intend for you to put a tube on top of the vent.

Has anyone used this type of vent?  Should I run this as is or would you remove and replace with a more traditional vent tube/breather set up?

 

6/28/2020 8:06 AM  #2


Re: Strange Differential Vent

Don't know butt..................it looks like this is just a vent with a cap on it to keep dirt from entering the vent. Don't you think so?!

If you want it to look more vintage you could take that off and replace it with an open fitting and run a hose from the fitting to a higher point under the car!
You could give it the NASCAR "look" and attach a large filter on the end of the hose and mount it somewhere accessible  under the car or inside the cabin!!
6sal6


Get busy Liv'in or get busy Die'n....Host of the 2020 Bash at the Beach/The only Bash that got cancelled  )8
 

6/28/2020 8:34 AM  #3


Re: Strange Differential Vent

Yup, it's definitely a cap to keep dirt out. But the cap is crimped on the tube, if floats around up and down but the cap can't be removed without destroying the cap, which makes me think they intend for you to run it as is.

     Thread Starter
 

6/28/2020 8:36 AM  #4


Re: Strange Differential Vent

What you have is fine. I can’t say that one will function better than the other. It’s a matter of choice if you want to swap it out to a hose.


John  -- 67 Mustang Coupe 390 5 speed
 

6/28/2020 10:00 AM  #5


Re: Strange Differential Vent

Unless you plan on doing high water crossings, you should be fine.

 

6/28/2020 12:22 PM  #6


Re: Strange Differential Vent

Perfect, thanks. One less thing on my to do list!

     Thread Starter
 

6/28/2020 3:39 PM  #7


Re: Strange Differential Vent

Ford changed to that style vent on truck rear ends way back when.  I would think it is better because it acts like a check valve when the oil is in cool-down phase, keeping dirt out, to some extent.  The cool down creates a vacuum that tries to suck stuff back inside. But it easily exhausts heated air.


Money you enjoy wasting is NOT wasted money... unless your wife finds out.
 

6/28/2020 3:54 PM  #8


Re: Strange Differential Vent

Its like the vent Ford used on all the Fox cars.  Like Nos681 said, if you aren't going to submerge the rear it will work just fine. 

 

6/28/2020 5:57 PM  #9


Re: Strange Differential Vent

Thanks, guys!

     Thread Starter
 

Board footera


REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.