FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » Moog or Proforged balljoints?

    • 1 of 1

       

    8/07/2020 12:58 PM  #1

    Chuck
    FYI FORD Member

    Offline

    Registered: 8/03/2020
    Posts: 10

    Moog or Proforged balljoints?

    The guy i talk to at Napa said Moog was sold and is all chinese crap now and recommended Proforged (they dont make the lower a arm ball joint set up) so should i just get Moog? I look them up Proforged  they are made in taiwan but are used by hotchkins suspension company and they said they are good stuff. Any advice on other companys that are good ect is appreciated. Thanks! My car is a 65 Mustang.

    Last edited by Chuck (8/07/2020 12:58 PM)

     

    8/07/2020 6:25 PM  #2

    HudginJ3
    Senior 24-7 FYI Addict

    Offline

    From: Cedar Hill, TX
    Registered: 4/29/2015
    Posts: 1,249

    Re: Moog or Proforged balljoints?

    I think it's fine and well to not want China stuff but some things are impossible to not get from them. Some airplanes and airplane engines are made in China. Repairing would be impossible with going to China for parts. The Moog parts have been manufactured in China quite a while. They seem OK except for the Wuhan mixed in the metallurgy. Another option would be to rebuild the originals.

    70, ragtop 351W/416 stroker Edel Performer heads w pro flow 4, Comp roller 35-421-8. T5
     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  Moog or Proforged balljoints?

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.