FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » Tail Shaft Leak

    • 1 of 1

       

    8/24/2013 4:12 AM  #1

    MWM
    I FYI 24-7

    Offline

    Registered: 4/01/2013
    Posts: 423

    Tail Shaft Leak

    I have a T5 transmission out of the '93 cobra. It appears there is a leak at the tail shaft where the driveshaft goes in. My question is does anybody have a resource of literature that I can use as reference and is this something that I can change my own? Any details is greatly appreciated!
    thank you

     

    8/24/2013 5:33 PM  #2

    MWM
    I FYI 24-7

    Offline

    Registered: 4/01/2013
    Posts: 423

    Re: Tail Shaft Leak

    Has anyone changed a tail shaft seal?

       •Thread Starter
     

    8/24/2013 6:15 PM  #3

    HenryJ
    I FYI 24-7

    Offline

    From: Westlake, TX
    Registered: 4/11/2013
    Posts: 363

    Re: Tail Shaft Leak

    I did way back as a teenager. IIRC I just pounded it out and pounded in a new one. When you're done you'll rank it at the top of the list as one of the easiest things you've done to the car.

     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  Tail Shaft Leak

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.