| ||
Visit MustangSteve's web site to view some of my work and find details for: FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events |
1 of 1
Offline
Which upper and lower boot are you using on the Pro 5,0 shifter Power Tower? I googled up a few but it was kinda pricey for what it was. Do any of yall have something that worked and source.
Offline
Use the foxbody lower boot. It bolts on the tunnel. With it tight around the shifter, the upper Hurst boot can tuck under the console or can be screwed down as well.
Offline
MS wrote:
Use the foxbody lower boot. It bolts on the tunnel. With it tight around the shifter, the upper Hurst boot can tuck under the console or can be screwed down as well.
I ordered a new one the only one I had looks to be an original from the 80's and a little battled scared.
1 of 1
REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on. |