| ||
Visit MustangSteve's web site to view some of my work and find details for: FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events |
Offline
These both came out of my 65. The 289 I believe to be the original one to my car. It was rebuilt in 2009, If I remember correctly it was bored .30 over during the rebuild. I had some issues with the cam where it chewed up a lifter. It ran when I removed it and has sat on the pallet in my garage since removed. It will turn over!
The C4 was rebuilt same time as the engine, It has less then 5000 mile on the rebuild and was removed when I installed my AOD. It is not original to my car as it carries a 66 parts number
I also have a rear chunk that has less then 500 miles it is for an 8" rearend and is 3.00 gears
not sure what they are truly worth but I'll list them at $300 each
Pics available I will post if I can remember how!!
All these would probably need to be picked up here, I'm 60 miles east of St. Louis Mo
any ????? call or text me at 618-292-8892
Offline
I am interested in the C4, but don't plan to be in Vadalia until the bash and need it before then.
REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on. |