FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » Part Number for Rear Axle seals? (8 inch rear, 28 spline)

    • 1 of 1

       

    6/14/2022 1:43 PM  #1

    TremendousWand
    I FYI 24-7

    Offline

    Registered: 5/16/2013
    Posts: 657

    Part Number for Rear Axle seals? (8 inch rear, 28 spline)

    I can't seem to get a simple answer and don't want to order the wrong parts.  I'm looking for the axle grease seals that get pressed on to the axle housing, not on the axles themselves.  Anyone have a part number?

    1966 Mustang, stock 8 inch rear with 28 spline axles.  

    thank you

     

    6/14/2022 5:44 PM  #2

    Texas!
    FYI Addict

    Offline

    Registered: 6/27/2014
    Posts: 231

    Re: Part Number for Rear Axle seals? (8 inch rear, 28 spline)

    51322. Timken or National.

     

    6/15/2022 6:52 AM  #3

    Bolted to Floor
    Senior 24-7 FYI Addict

    Offline

    From: Houston, Texas
    Registered: 4/01/2013
    Posts: 2,014

    Re: Part Number for Rear Axle seals? (8 inch rear, 28 spline)

    It can be a problem to get the right seal. I had to take measurements from my housing and axle shaft to get the right part. O'Reilly's website gives the dimensions with the part numbers. 

    John  -- 67 Mustang Coupe 390 5 speed
     

    6/15/2022 1:18 PM  #4

    TremendousWand
    I FYI 24-7

    Offline

    Registered: 5/16/2013
    Posts: 657

    Re: Part Number for Rear Axle seals? (8 inch rear, 28 spline)

    Got it, Thanks!

       •Thread Starter
     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  Part Number for Rear Axle seals? (8 inch rear, 28 spline)

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.