| ||
Visit MustangSteve's web site to view some of my work and find details for: FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events |
Offline
Anyonye know how long the screws are that go though the instrument panel and hold the dash pad in place are? Should have bought the hardware kt when I bought the pad, but didn't think of it at the time.
My car didn't have a pad or instrument panel when I got it. 1967 coupe. Don't really want to poke holes through the new pad.
Offline
I dunno if same for the 67 my 641/2" coupe are 1" number 8 I think but you can determine that by if you take a interior trim piece to the hardware store and the head fits nice. Mine I got stainless screws from ace hardware a box of 100 for like 5 bucks great deal the only place there's are two short are the silplates you need about 11/4" and then the arm rest which on mine are like a number 12 or something hope this helps
REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on. |