FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » 2" orbital sander

    • 1 of 1

       

    12/29/2022 10:38 AM  #1

    Greg B
    Senior 24-7 FYI Addict

    Offline

    Registered: 4/01/2013
    Posts: 1,695

    2" orbital sander

    Talkin bout it one last time.  I've mentioned it's my favorite lil sanding tool.  First, I'm saying that HF is clearancing them out, so if you ever wanted one, they is cheap at the moment.  Different brands are sold by other sellers, as well.  Second I want to show my wife's brilliant Christmas present to me.  It's a 2" hole punch sne got off the Am* site.  Sure beats using scissors like I had been doing.  I also got a backup unit as you can see, but years ago I made a little adaptor to use 3m pads so I'm going to set it up to try it because I never did.  Hope this post helps and informs. 


    If multiple things can go wrong, the one that will go wrong will be the one that causes the most damage.
     

    12/29/2022 11:22 AM  #2

    Bullet Bob
    Senior 24-7 FYI Addict

    Offline

    From: Montrose, Colorado
    Registered: 4/01/2013
    Posts: 4,885

    Re: 2" orbital sander

    All good ideas, Greg.  Thanks, and Happy New Year!!

    "you get what you pay for, good work isn't cheap, and there are NO free lunches...PERIOD!"
     

    12/29/2022 1:17 PM  #3

    rpm
    Senior 24-7 FYI Addict

    Offline

    From: Bakersfield, Ca
    Registered: 9/17/2013
    Posts: 3,646

    Re: 2" orbital sander

    Thanks for the hot tip.

    Bob. 69 Mach 1, 393W, SMOD Toploader, Armstrong  steering, factory AC.
     

    12/29/2022 7:51 PM  #4

    Ron68
    Senior 24-7 FYI Addict

    Offline

    From: Mukilteo, Washington
    Registered: 4/01/2013
    Posts: 1,575

    Re: 2" orbital sander

    Of course the several closest HF stores to me are out of stock. Closest is 36 miles away...

    68 coupe - 351W, 4R70W, 9" 3.25 -- 65 convertible - 289 4v, C4, 8" 3.00
     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  2" orbital sander

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.