FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » I know I won't get a lot....

    • 1 of 1

       

    9/04/2013 2:34 PM  #1

    boomyal
    Senior 24-7 FYI Addict

    Offline

    From: Vancouver, Washington
    Registered: 4/01/2013
    Posts: 1,295

    I know I won't get a lot....

    ....of sympathy from a lot of you Mustang project warriors, but I thought this was a whole lot of work, time and tools just to change out a battery that was held in by 4 bolts.

    After a good bit of two days, I finally got the bumper bracket back on and half the tools in my garage put back away.

     

    9/04/2013 3:18 PM  #2

    MS
    Forum Originator

    Offline

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 12,688

    Re: I know I won't get a lot....

    boomyal wrote:

    ....of sympathy from a lot of you Mustang project warriors, but I thought this was a whole lot of work, time and tools just to change out a battery that was held in by 4 bolts.

    After a good bit of two days, I finally got the bumper bracket back on and half the tools in my garage put back away.

     You wouldn't be doing it if it wasn't fun !!!

    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
     

    9/04/2013 3:29 PM  #3

    boomyal
    Senior 24-7 FYI Addict

    Offline

    From: Vancouver, Washington
    Registered: 4/01/2013
    Posts: 1,295

    Re: I know I won't get a lot....

    The amazing thing is that I took this all apart and put it all back together (whole car)  31 years ago and as I was duplicating this little part of the bigger project, I continually marveled at how I was able to figure all this stuff out while I was running a business at the same time.  Needless to say, it was like I had never done it before.

       •Thread Starter
     

    9/04/2013 7:44 PM  #4

    6sally6
    Hyper FYIFORD ADDICT

    Offline

    From: Surfside Beach,SC
    Registered: 4/02/2013
    Posts: 6,982

    Re: I know I won't get a lot....

    boomyal wrote:

    The amazing thing is that I took this all apart and put it all back together (whole car)  31 years ago and as I was duplicating this little part of the bigger project, I continually marveled at how I was able to figure all this stuff out while I was running a business at the same time.  Needless to say, it was like I had never done it before.

    Its called..........getting feeble!
    -oh no I used a word I shouldn't have--me how eye nose!
    6sal6
     

    Get busy Liv'in or get busy Die'n....Host of the 2020 Bash at the Beach/The only Bash that got cancelled  )8
     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  I know I won't get a lot....

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.