FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » Under dash hydraulic clutch MC

    • 1 of 1

       

    2/03/2023 6:04 PM  #1

    Mark in CA
    FYI FORD Member

    Offline

    From: Wickenburg, AZ
    Registered: 4/01/2013
    Posts: 52

    Under dash hydraulic clutch MC

    Anybody using or have input for Malwood’s under dash clutch master cylinder assembly? https://www.malwoodusa.com/hydraulic-under-dash/malwood-usa-1964-1966-mustang-hydraulic-master-cylinder-clutch-pedal-kit-billet-reservoir/  
    I was at Barrett Jackson last week and finally pulled the trigger on a Blueprint 302 Cruiser engine/trans package but the trans is set up with McLeod hydraulic throw out with internal slave. I had already set my car up for MS cable clutch (which I will be selling) a few years ago. With the brake booster and SSBC Prop Block, I have no room on the firewall and it looks like Malwood solves my problem. Any thoughts?

     

    2/03/2023 6:10 PM  #2

    Rufus68
    I FYI 24-7

    Offline

    From: Knoxville, TN
    Registered: 4/26/2017
    Posts: 889

    Re: Under dash hydraulic clutch MC

    Two thoughts, first it is pricey - but that's only relevant to you.  Second thought is to make sure it pushes enough fluid for your slave cylinder.
     

    1968 T-code Coupe with a 302.  Nice car, no show stopper for sure, but I like it.
     

    2/03/2023 10:37 PM  #3

    50vert
    Senior 24-7 FYI Addict

    Offline

    From: QLD Australia
    Registered: 4/01/2013
    Posts: 1,421

    Re: Under dash hydraulic clutch MC

    The Mal Wood stuff has a great name down here. Made not far from me. A lot of guys over there seem to be swapping out the Modern Driveline stuff for it. They all seem happy.

    "Those telephone poles were like a picket fence"
     

    2/03/2023 11:20 PM  #4

    rpm
    Senior 24-7 FYI Addict

    Offline

    From: Bakersfield, Ca
    Registered: 9/17/2013
    Posts: 3,643

    Re: Under dash hydraulic clutch MC

    I don't enjoy working on the brake light switch under the dash. There's no way in hell I'll ever install a brake master cylinder under there.

    Bob. 69 Mach 1, 393W, SMOD Toploader, Armstrong  steering, factory AC.
     

    2/04/2023 12:38 PM  #5

    BobE
    Senior 24-7 FYI Addict

    Offline

    From: White Plains, NY
    Registered: 4/04/2013
    Posts: 2,635

    Re: Under dash hydraulic clutch MC

    Looks like an interesting setup.  Seems like it would further complicate the already tight under-dash area, and I wouldn’t want any potential leak in the interior.
    Nice looking reservoir.
    As Rufus 68 posted, verify the volume of the MC is compatible with the volume needed to properly operate the slave cylinder travel. 
    Suggest to also verify if the clutch pedal in the stock location, or is it moved over somewhat. 

    65 Fastback, 351W, 5-speed, 4 wheel discs, 9" rear,  R&C Front End.
     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  Under dash hydraulic clutch MC

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.