FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » Having problems converting to Saden Compressor

    • 1 of 1

       

    2/20/2023 9:07 PM  #1

    BILLY WALTON from GEORGIA
    Carrollton, GA Bash Host

    Offline

    From: CARROLLTON GEORGIA
    Registered: 4/14/2013
    Posts: 2,431

    Having problems converting to Saden Compressor

    I cant figure out where to get the hoses for this conversion. The under dash unit is the factory and changed the compressor from York to sanden now of course the hose coming from the under das unit has wrong end on the end going to the compressor.

    Its really me....I fixed my caps lock .
     

    2/20/2023 9:18 PM  #2

    BILLY WALTON from GEORGIA
    Carrollton, GA Bash Host

    Offline

    From: CARROLLTON GEORGIA
    Registered: 4/14/2013
    Posts: 2,431

    Re: Having problems converting to Saden Compressor

    figured I could take the hose to local parts place and they could make it with the right ends on it butttttt nooooooo
     

    Its really me....I fixed my caps lock .
       •Thread Starter
     

    2/21/2023 6:46 AM  #3

    TKOPerformance
    Hyper FYIFORD ADDICT

    Offline

    From: Newark, DE
    Registered: 12/15/2014
    Posts: 7,486

    Re: Having problems converting to Saden Compressor

    Cal up Classic Auto Air, Old Air Products, etc.  They should e able to send you a correct set of hoses.  I spoke to CAA about this same conversion and they said it was common and they had hoses. 

     

    2/21/2023 2:08 PM  #4

    BobE
    Senior 24-7 FYI Addict

    Offline

    From: White Plains, NY
    Registered: 4/04/2013
    Posts: 2,633

    Re: Having problems converting to Saden Compressor

    These people might also be able to help.
    "Gotta Show", gottashow.com, 602-237-4506, they are in Arizona. 

    65 Fastback, 351W, 5-speed, 4 wheel discs, 9" rear,  R&C Front End.
     

    2/21/2023 2:24 PM  #5

    BILLY WALTON from GEORGIA
    Carrollton, GA Bash Host

    Offline

    From: CARROLLTON GEORGIA
    Registered: 4/14/2013
    Posts: 2,431

    Re: Having problems converting to Saden Compressor

    TKOPerformance wrote:

    Cal up Classic Auto Air, Old Air Products, etc.  They should e able to send you a correct set of hoses.  I spoke to CAA about this same conversion and they said it was common and they had hoses. 

    Did you stay with factory under dash Ford? Flare fittings on under dash unit and under hood o ring fittings on the saden?

     

    Last edited by BILLY WALTON from GEORGIA (2/21/2023 2:24 PM)

    Its really me....I fixed my caps lock .
       •Thread Starter
     

    2/21/2023 6:06 PM  #6

    MS
    Forum Originator

    Offline

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 12,237

    Re: Having problems converting to Saden Compressor



    Go to www.coldhose.com

    They have everything you need, plus all the tech info so you can visually see exactly what you need to get.

    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
     

    2/21/2023 8:08 PM  #7

    BILLY WALTON from GEORGIA
    Carrollton, GA Bash Host

    Offline

    From: CARROLLTON GEORGIA
    Registered: 4/14/2013
    Posts: 2,431

    Re: Having problems converting to Saden Compressor

    I will send the links to my mechanic.

    Its really me....I fixed my caps lock .
       •Thread Starter
     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  Having problems converting to Saden Compressor

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.