FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » Trunk weather seal direction?

    • 1 of 1

       

    9/05/2013 8:58 PM  #1

    whlnut
    I FYI 24-7

    Offline

    From: Brunswick, GA
    Registered: 4/02/2013
    Posts: 317

    Trunk weather seal direction?

    Does the open channel face in or out?? I've seen it recommended both ways. I only want to do it once. I do know the ends are centered at the latch.

     

    9/06/2013 12:07 PM  #2

    wsinsle
    Senior 24-7 FYI Addict

    Offline

    From: Belle Vernon, PA
    Registered: 4/01/2013
    Posts: 1,786

    Re: Trunk weather seal direction?

    Mine is in. I remember looking into this when I put it on, but don't remember where I found the information.

    If this forum can't fix it, it isn't broke.
     

    9/06/2013 3:04 PM  #3

    Novi Rick
    FYI Addict

    Offline

    From: Novi, Michigan
    Registered: 4/01/2013
    Posts: 148

    Re: Trunk weather seal direction?

    Open side of the gasket toward the inside of the trunk lid.  That's what the assembly manual shows in the diagram.

     

    9/06/2013 10:49 PM  #4

    whlnut
    I FYI 24-7

    Offline

    From: Brunswick, GA
    Registered: 4/02/2013
    Posts: 317

    Re: Trunk weather seal direction?

    Thanks guys. In it is.

       •Thread Starter
     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  Trunk weather seal direction?

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.