FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » 4 Wheel Disc Conversion - Brake Lines, Master Cylinder, Parts List

    • 1 of 1

       

    9/10/2013 10:57 AM  #1

    Chelby-Ann
    FYI Addict

    Offline

    From: Mocksville, North Carolina
    Registered: 4/07/2013
    Posts: 169

    4 Wheel Disc Conversion - Brake Lines, Master Cylinder, Parts List

    Now that I have my car back from the paint shop, I have installed the carpet, headliner and made a new package tray for my '69 Coupe.
    I want to get the brake sytem done next and need some help with the parts list.
    I purchased and installed MS Disc Brake brackets some 3-4 years ago. I have the rotors, calipers and 17" Rims.
    The car had 4 wheel drums and was a 3 speed manual tranny with a 6 cyliner.
    Can someone help point me in the right directions as to who I can buy a complete brake line kit from, Master Cylinder, valves, hoses, etc.
    Mustang Steve, would you carry everything I need?
    Also, can I use my existing brake peddle set up?

    Thank You
    Bill
     

    Last edited by Chelby-Ann (9/10/2013 10:57 AM)

     

    9/10/2013 5:14 PM  #2

    MS
    Forum Originator

    Offline

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 12,496

    Re: 4 Wheel Disc Conversion - Brake Lines, Master Cylinder, Parts List

    I would not buy a custom made pre-bent set of brake lines.  They won't fit waht you have.  Make them from scratch for aound $20.

    Are you going with power brakes?  If not, you will regret it and it will be alot more work once the car is together.

    I have everything except hoses, and will make sure you get exactly what you need for the job.  Just email or call.

    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  4 Wheel Disc Conversion - Brake Lines, Master Cylinder, Parts List

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.