| ||
Visit MustangSteve's web site to view some of my work and find details for: FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events |
Offline
How do the heater hoses route from the water pump/manifold to the heater box? I have a 302 and there is no A/C.
2 holes in the firewall. The bottom hole in the firewall is directly in line with the connection to the heater core.
Thanks
Offline
You want the pressurized hose to go to the bottom of the heater core, so it fills from the bottom and will not trap air.
The pressure hose comes from the top of the intake manifold. The suction hose goes to the water pump.
Offline
Thank you
REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on. |