| ||
Visit MustangSteve's web site to view some of my work and find details for: FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events |
Offline
I am in need of the two stainless screws that hold the stainless window frame to the door glass mounting bracket for my 66 coupe. I am not seeing them available anywhere aftermarket. Anyone have any door glass laying around that would be willing to part with the screws?
Offline
I can help you out with that I think. I have a couple of coupe windows that I probably will never need. You are talking about the little screws that attach the wrap around stainless trim to the glass channel right? I am at work right now so I will need to make sure that they are still there. If they are, I will send them to you.
Offline
Yes Rick, those are the ones I need. Thank you so VERY much!
I'll send you a PM
Offline
Had the same problem. I tapped them out and used some small machine screws. Perfect.
Offline
Kris - I sent you a pm but the screws in the spare windows I have were self tapping screws. I don't think they are correct but they are yours if you want them.
Offline
When I tore my coupe apart also most all the interior screws besides the sill plate screw and armrest base screws were the same stainless steel number 8 I believe by 3/4" don't quote me it's been a while though seance I did mine but I also bought a box of 50 from the family owned hardware store here in Riverton utah it's a branch of of ace hardware pretty good deal to I got a box for $5.00
Offline
Thanks Rick! I think for now I will see if I can get some machine screws that will work. I appreciate your efforts!!
Kris
REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on. |