| ||
Visit MustangSteve's web site to view some of my work and find details for: FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events |
Offline
This car was born a 6cyl 200 ci. I purchased the car in 2005 with the 200 blown. The P.O. bought a short block 1969 302 and had rebuilt the c-4 transmission but then lost interest in doing the conversion. I replaced all the front suspension with 8 cylinder parts and did the Shelby drop, installed a 1" front sway bar, 1" lowering front coils springs, and disc brakes up front. I finished up the motor with and Edlebrock performer intake, summit 600 cfm carb., tri-y headers, flow master delta 40's mufflers, pertronix HEI distributer, and a Holley manuel fuel pump with a 2300 cfm electric fan.
Last edited by calistang (4/17/2013 7:04 PM)
Offline
What paint did you use on the engine compartment?
REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on. |