| ||
Visit MustangSteve's web site to view some of my work and find details for: FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events |
Offline
I have a complete front and rear suspension for a 65-66 Mustang fastback. All pieces have only 1765 miles on them. The front springs are Eibach variable rate and LCA's have roller spring perches installed on them, rear springs are 3 1/2 leaf mid eye with poly bushings. Front and rear shocks are Koni, front spindles are original to the car with 10 inch SSBC discs, calipers and pads. Braided lines included. Rear drums only without shoes and associated springs but there are backing plates. Please see pictures for additional detail. I would prefer not tp part out the pieces but will do so if no interest in the whole setup. please contact Frank at fdcjl@optonline.net with any interest.
REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on. |