FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » Swap Meet
  •  » Wanted: Junk 28 spline axles for making traction lok tool in DFW area

    • 1 of 1

       

    4/08/2014 9:03 AM  #1

    jkordzi
    I FYI 24-7

    Offline

    From: Sequim, WA
    Registered: 12/28/2013
    Posts: 927

    Wanted: Junk 28 spline axles for making traction lok tool in DFW area

    I'm rebuilding the traction lock in my 65 FB and I'd like to get a couple of 28 spline axles (either junk or unwanted) for making some alignment and setup tools.  Length or condition unimportant, as long as the splines and about a foot of the axles are good.  In return, I'll post a write-up on my experience in  rebuilding the traction lok and setting up the 9" differential.  I live east of Dallas and will drive to you if you're in the general DFW area.  Pls PM me.  Thanks.

    Last edited by jkordzi (4/08/2014 9:04 AM)

    Cheap, Fast, Good:  Pick Any Two
     

     

    1 of 1

  • Index
  •  » Swap Meet
  •  »  Wanted: Junk 28 spline axles for making traction lok tool in DFW area

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.