FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » TRANSMISSION COOLER

    • 1 of 1

       

    9/15/2014 3:57 AM  #1

    marsfl1
    FYI FORD Member

    Offline

    From: Sarasota, Fl.
    Registered: 8/27/2013
    Posts: 74

    TRANSMISSION COOLER

    I need recommendations on relocating my trans cooler it is currently in front of my A/C condenser.
    It is the only cooler there isn't one in my radiator. Where to locate it, what size, heat sink or finned, and with or without it's own fan.
    1969 Mach 1, 351 windsor about 350 hp, AOD trans with shift kit and other goodies.

    IF IT'S TO LOUD YOUR TO OLD
     

    9/15/2014 8:13 AM  #2

    Rudi
    Senior 24-7 FYI Addict

    Offline

    From: Stuck in the 50's Welland Ca
    Registered: 4/01/2013
    Posts: 4,081

    Re: TRANSMISSION COOLER

    I have air as well and put my cooler under the rad as in this photo.
     Since the picture was taken I have removed the electric fan, installed an aluminum rad with an engine driven fan, The cooler now is in series with the rad tranny cooler.

    Good work ain't cheap, Cheap work ain't good!
     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  TRANSMISSION COOLER

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.