| ||
Visit MustangSteve's web site to view some of my work and find details for: FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events |
Offline
Is there a trim piece that goes on the interior at the windshield "A" pillar post? Jerry
Offline
retired 65 wrote:
Is there a trim piece that goes on the interior at the windshield "A" pillar post? Jerry
If you are taking "65/66" there is a small piece, about 1/2" wide and shaped to wrap the "A" pillar that hides the raw edge of he headliner. The "A" pillar itself gets painted dash color.
BB
Offline
Bullet Bob wrote:
retired 65 wrote:
Is there a trim piece that goes on the interior at the windshield "A" pillar post? Jerry
If you are taking "65/66" there is a small piece, about 1/2" wide and shaped to wrap the "A" pillar that hides the raw edge of he headliner. The "A" pillar itself gets painted dash color.
BB
Thanks for the info. I was laying in bed after I sent the question and realized no one could read my mind. "Good thing", cause there would only be cob webs. Sorry 'bout that. Jerry
Offline
retired 65 wrote:
Bullet Bob wrote:
retired 65 wrote:
Is there a trim piece that goes on the interior at the windshield "A" pillar post? Jerry
If you are taking "65/66" there is a small piece, about 1/2" wide and shaped to wrap the "A" pillar that hides the raw edge of he headliner. The "A" pillar itself gets painted dash color.
BBThanks for the info. I was laying in bed after I sent the question and realized no one could read my mind. "Good thing", cause there would only be cob webs. Sorry 'bout that. Jerry
See I forgot it again and yes I am working on a '65.
Offline
When I got my headliner put in.......the guys ran the headliner material down the A pillar and put the trim piece at the top were the two "seams" would come together. Looks clean!
6s6
Offline
Jerry, I apologize for being slow with this pic. Here is the upper drivers side corner in my 65FB
Last edited by TimC (10/23/2014 5:26 PM)
REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on. |