FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » DIY Monte Carlo What Is The Width??

    • 1 of 1

       

    5/08/2013 10:38 AM  #1

    Uwiik
    FYI FORD Member

    Offline

    From: Jakarta-Indonesia
    Registered: 5/01/2013
    Posts: 92

    DIY Monte Carlo What Is The Width??

    Planning to fabricate my own monte carlo bar together with my DIY subframe connector this weekend. Does anyone have a default width wall to wall where the monte carlo bar mounts? Need to make sure I have default width instead of 40 years plus sagged width. 

    Thanks in advance!!

    1968 'C' Code Coupe, M Yellow, Parchment Interior, Street Or Track IFS, Randalls R&P, JBA & more later
     

    5/08/2013 9:13 PM  #2

    Uwiik
    FYI FORD Member

    Offline

    From: Jakarta-Indonesia
    Registered: 5/01/2013
    Posts: 92

    Re: DIY Monte Carlo What Is The Width??

    Found the answer, it's 40" in case anyone wondering about the same thing. 
    I am a happy man, mine is exactly at 40", no more no less....

    Last edited by Uwiik (5/09/2013 1:10 AM)

    1968 'C' Code Coupe, M Yellow, Parchment Interior, Street Or Track IFS, Randalls R&P, JBA & more later
       •Thread Starter
     

    5/09/2013 3:57 PM  #3

    MS
    Forum Originator

    Offline

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 12,155

    Re: DIY Monte Carlo What Is The Width??

    I just happen to have the MC bar off the car right now.  I measured it inside to inside of the bracket, right at the top.  It measures 39-7/8".  Pretty darn close to 40".

    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  DIY Monte Carlo What Is The Width??

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.