FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » 8.8 differential yoke

    • 1 of 1

       

    5/17/2013 8:48 AM  #1

    hmartin025
    I FYI 24-7

    Offline

    Registered: 4/01/2013
    Posts: 365

    8.8 differential yoke

    Need new yoke on 8.8 differential. Prefer to purchase from  MS board member. Ideas, please.
    Howard

     

    5/17/2013 9:53 AM  #2

    Michael H.
    I FYI 24-7

    Offline

    From: Laurel, MS
    Registered: 4/01/2013
    Posts: 869

    Re: 8.8 differential yoke

    Do you need the plate that is setup with a crush sleeve on the pinion gear (mounted on the rear end) or do you need the plate that bolts to that(mounted on the rear u-joint)?

    If you just need the plate that is mounted to the rear u-joint I have one you can have if you pay shipping.
    It is off of an explorer driveshaft, but I believe it is the same.

     

    5/17/2013 11:52 AM  #3

    hmartin025
    I FYI 24-7

    Offline

    Registered: 4/01/2013
    Posts: 365

    Re: 8.8 differential yoke

    Thanks Michael. The differential came with flat plate circular type driveline attachment. I'm needing a yoke for 65 Mustang Ujoint. Thank you
    Howard

       •Thread Starter
     

    5/17/2013 12:01 PM  #4

    Michael H.
    I FYI 24-7

    Offline

    From: Laurel, MS
    Registered: 4/01/2013
    Posts: 869

    Re: 8.8 differential yoke

    What I have is the plate that would hook up (via u-joint) to the rear of your driveshaft and then bolt directly to the flat plate on your 8.8 rear end.  If you decide you want it just send me a private message.

     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  8.8 differential yoke

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.